Power plug comparison table
EUBK=European standard black EURD=European standard red
USBK=U.S. standard black etc...
UKBK=British standard black
(EU: plug specification BK: product color black RD: product color red)
Product video: HKS0201A1U
This 2x1 HDMI KVM Switch provides you with great flexibility in integrating cross-platform computer equipment easily. It makes you available to switch easily and reliably between any HDMI computers using one HDMI compliant display.
The 2x1 HDMI KVM Switcher supports USB 2.0 hub and USB 2.0 keyboard /mouse. By using USB 2.0 hub ports on the KVM, you even can attach USB drive, printer, barcode scanner or other USB devices to the KVM. Switching can be controlled through variable methods, such as the front panel source selector buttons, IR signals and hotkeys on the keyboard. With L/R audio output.
●Support auto-switching to monitor computers in a specified time interval
●Support hotkey commands and mouse gesture to switch inputs
●Available to use keyboard without any delay after switch input sources
●Support resolution up to 3840*2160@60Hz 4:4:4
●Compliant with HDCP 2.2
●Support USB2.0 for printers, USB drives etc
●With EDID emulators in every input ports, keep PCs always have correct display information
●Support front panel buttons, IR signals, keyboard hotkeys to control KVM switch
●Support Unix/Windows/Debian/Ubuntu/Fedora /Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux based system
●Support hot plug, connect or disconnect devices to the KVM switch in any time and without turn off devices
●Support analog L/R audio output
●Support HDR 10 and Dolby Vision
KVM SWITCH FAQ
Q01: The LED light of the KVM switch is displayed normally, and the keyboard and mouse work normally also. Why the display doesn’t have video output?
A: Please check if the HDMI cable of the input/output is properly connected. The “online” light on the KVM switch indicates the USB connection status.
Q02: The remote control is defective / Why does the remote control not work?
A: Due to the strict review of batteries by international logistics and Amazon, our remote control is not equipped with a battery; please load the CR2025 battery before using the remote control.
Q03: When the mouse touches the edge of the screen during normal movement, it will switch to another computer. This is too sensitive. How to adjust?
A: You can deactivate the quick mouse change mode by clicking on the [Scroll Lock] + [Scroll Lock] + [F12] keyboard.
Q04: How many long cables can I use for the KVM switch?
A: Tips for HDMI cable length:
1. When using 4K@60Hz as an input, it is required that Input HDMI cable < 3 meters and the output HDMI cable < 5 meters;
2. When using 4K@30Hz as an input, it is required that Input HDMI cable <5 meters and the output HDMI cable < 10 meters;
3. When using 1080@60Hz as an input, it is required that Input HDMI cable <10 meters and the output HDMI cable < 15 meters.
Q05: If the mouse doesn’t respond correctly to the command?
A: You can use your mouse to connect to the USB2.0 port of the KVM switch. (Note: Using this port will not be able to use the mouse to quickly switch modes).
If the problem is still not resolved, please insert the mouse into the PC in issue to confirm that it is working properly.
Q06: Why can't my multimedia keyboard transfer multimedia functions (play, pause, etc.) when using the KVM switch?
A: You can use your multimedia keyboard to connect to the USB2.0 port of the KVM switch. (Note: Since the USB2.0 port does not have USB emulation, the hotkey switching function cannot be used).
If the problem is still not resolved, please insert the multimedia keyboard into the PC in issue to confirm that it is working properly.
Q07: How to make L/R audio work properly?
A: Your computer needs to transmit audio over the HDMI connection. If the audio doesn’t work, please select the HDMI output device in the sound settings of your computer.
Q08.How to change the hotkeys combination?
If your keyboard doesn't with the [ScrollLock] key or the [ScrollLock] key is used for other functionality, you can take [Right-Ctrl] hotkey instead of [ScrollLock] key by below way:
Method 1:.Execute hotkey command [ScrollLock]+[ScrollLock]+[F1].
Method 2:You can press and hold the "SW" key on the KVM panel for about 10 seconds until you hear a beep, and the way to switch the hotkey will be changed (If it is currently [ScrollLock]+[ScrollLock] + Number, it will be changed to [[Right-Ctrl] + [Right-Ctrl] + Number)
The same if you want to change the hotkey from [Right-Ctrl] to[ScrollLock], you could do as follows:
Method 1:Execute hotkey command: [Right-CtrI]+[Right-CtrI]+[F1].
Method 2:You can press and hold the "SW" key on the KVM panel for about 10 seconds until you hear a beep, and the way to switch the hotkey will be changed (If it is currently [[Right-Ctrl] + [Right-Ctrl] + Number, it will be changed to [ScrollLock]+[ScrollLock] + Number